Contains:

• Didecyl dimethyl ammonium chloride (<1%)
• Alkyl (C12–16) dimethylbenzyl ammonium chloride (<1%)
• Non-ionic surfactant (<1%)
• Chelating agent (<1%)
• Deionised water (>95%)

All active substances supported under the EU BPR active substance review programme for human hygiene and public health disinfectant use.

Dilute at a ratio of 1:20 before use.

• Add 1 part concentrate to 20 parts clean water.
• Example: 50ml concentrate + 1 litre water.
• 1L concentrate produces up to 20 litres of ready-to-use solution.

Always prepare fresh diluted solution daily.

WHEN-TO-USE

Between Clients (Halo Cycle Cleaning):

• Prepare diluted solution as directed.
• Fill system without exceeding maximm fill line.
• Run cleaning cycle for 3–5 minutes.
• Drain system fully after cycle completion.
• Rinse with clean water if required by equipment manufacturer.

End of Day (Tank Cleaning):

• Dilute as directed.
• Fill tank to recommended capacity.
• Run full cleaning cycle.
• Drain completely (make sure to NOT leave ANY water in the tank or basin, as stagnant water is very dangerous for your clients)
• Leave system empty and dry overnight.

Do not leave tools or components soaking beyond recommended cycle time.

For professional use only.

• Keep out of reach of children.
• Do not swallow.
• Avoid contact with eyes and skin.
• Do not inhale mist or spray.
• Do not mix with other cleaning agents or chemicals.

First Aid:

1. If in eyes: Rinse cautiously with water for several minutes.
2. If swallowed: Seek medical advice immediately.
3. If inhaled: Move to fresh air.
4. If irritation persists, seek medical attention.

Always test compatibility on a small area if unsure.

Storage

Store upright in original container.
Keep tightly closed when not in use.
Store in a cool, dry place below 40°C.
Protect from direct sunlight and frost.